
Non-percussive concrete cutting & drilling
Precise cuts. Controlled work. Experience since 2002.
From a small core hole to a demanding large-scale cut, we work methodically, with the emphasis on safety, a clean job and an accurate result.
We serve Attica, Boeotia, Corinthia, Evia, Cyclades, Argolida, and other areas by arrangement.
Our work by area: West Attica · Athens & Piraeus · Outside Attica
Our recent work
-
Opening in a concrete slab
Papagou, Athens
-
Doorway in a concrete wall
Milos, Cyclades
-
Removing a concrete staircase
Kineta, West Attica
-
Demolishing an old stone wall
Mandra, West Attica
-
Rooftop slab cut and crane lift
Nafplio, Argolida
-
Window opening in a concrete wall
Kineta, West Attica
Before and after
Capabilities
- Non-percussive cutting and drilling
- Since 2002
- Know-how gained on real jobs and in demanding conditions.
- Cutting depth, wall saw
- up to 73 cm
- 19 kW at the blade shaft, three-phase, for walls and reinforced concrete.
- Cutting with no power supply
- up to 27 cm
- A petrol saw with a Ring-type blade, for sites without electricity.
- Floor saw blade
- Ø700 mm
- Electric and petrol floor saws, for expansion joints, separating slabs and controlled floor cutting.
- Core drilling
- up to Ø500 mm
- From small diameters for anchors and services, in reinforced concrete.
- Mini excavator with hydraulic breaker
- Inside buildings
- Expandable tracks, down to 80 cm wide: it fits through doorways and narrow passages for demolition and concrete breaking.
- Pneumatic tools
- Air compressor
- Our own compressed-air unit for pneumatic breakers and drills, on heavy demolition and concrete breaking.
What we do
-
Concrete Floor Sawing
For expansion joints, separating slabs and controlled cutting of reinforced concrete floors.
-
Non-Percussive Concrete Cutting
For precise cuts in walls, slabs and reinforced concrete structures.
-
Strip-Out and Removals
Strip-out work done methodically, with respect for the client’s premises and project.
- WHOLE PIECES, NOT RUBBLE We take cut concrete out in whole pieces with straight edges: on pallets, by forklift or by crane.
- CUTS UP TO 73 CM DEEP Large-diameter blades for very thick walls, with know-how in the trade since 2002.
- ONE CREW FOR THE WHOLE JOB Cutting, drilling, breaking and removal by the same people, with the right equipment for each task.
- HARD-TO-REACH PLACES TOO At height, in basements and shafts, in industrial plants and inside lived-in homes, with respect for the client’s premises.
- MARKED BEFORE EVERY CUT Every opening is marked out first: proper planning and clean, controlled cuts, with close attention to detail.
How it works
Three steps, no surprises
From the first call to the finished opening, you know what comes next at every step.
- Get in touch Call us, or message us on Viber or by email with the opening or holes you need. A photo of the spot helps.
- Assessment and a free quote We assess the job, propose the right method and give you a clear price, with no obligation.
- Marking, cutting, a clean site We mark the opening, cut precisely and take the pieces out whole. No broken rubble is left behind.
What our customers say
“One of the best professionals I have worked with. The crew was flawless in everything: very good work and very good prices. Even over Viber they replied straight away, which made everything much easier for us.”
Outdoor area works · Google ·
“Real professionals. They did the job on the day and at the time we had agreed. The crew who did the cutting were flawless.”
Facebook ·
“Responsibility and quality. Recommended!!!”
Facebook ·
Frequently asked questions
What is non-percussive concrete cutting?
Cutting and drilling concrete without percussion, using specialist machinery. The intervention is controlled, with the least possible stress on the rest of the structure.
Do you cut reinforced concrete?
Yes. We work on concrete and reinforced concrete, choosing the right method and equipment for each job.
How much dust and noise is there?
Cutting is done with water, which binds the dust. There is no percussion, so noise and vibration are far lower than conventional demolition, which is why the method suits occupied buildings.
Does an opening in a load-bearing wall need a structural study?
Yes. Work on load-bearing elements requires an engineer to approve it. We carry out the cut in line with the study and the instructions of the project engineer.
Do you need water and power on site?
A water and power supply near the work is needed. If there is none, tell us at the start so we can arrange it.
Do you remove the debris?
Yes, we also take care of removing the material. Mention it when you ask for a quote so it is included.
How soon can you start?
It depends on the job and the schedule. Tell us your timescale when you get in touch and we will say what is possible.
Do you work outside Megara?
Yes. We are based in Megara and serve Attica, Boeotia, Corinthia, Evia, the Cyclades and Argolida. We also take on jobs in other areas, by arrangement.
How is the work priced?
It depends on the job: per metre of cut, per hole, or as a fixed price. The price follows once we have seen exactly what the work involves.
Is the quote free?
Yes. Quotes are free and come with no obligation.
Get in touch
Opening hours
Monday – Friday: 07:00 – 15:30
Saturday: 08:00 – 14:30
Talk to us
Call for a free, no-obligation quote, or send us a message and we will get right back to you.
Ready to get started?
Get in touch today for a free, no-obligation quote.












